KIESEL

SERVOPERL ROYAL

HIGH STRENGTH FLEXIBLE, MOLD & STAIN RESISTANT GROUT

Vero-Learning-Kiesel-ServoFlex-Thinset
DATA SHEET
PERFORMANCE
SAFETY SHEET

Flexible Full Transfer Thin Set and Medium Bed Mortar

– Adjustable mortar consistency
– Rapid hardening development ( can be exposed to final heavy commercial traffic after three days only *)
– Excellent non sag characteristics for large and small format tiles
– No billowing of mortar through joints
– Extended coverage
– For interior and exterior application
– Reliable curing at low temperatures
– Can also be used over heated screed, balconies and patios
– In compliance with EN 12 004 C2 FE-S1
** white version available

Product Description

Flexible, acrylic polymer, cement-based thin set and medium bed mortar with polymer additive for application layers of up to 25/32″ (20 mm) for interior and exterior installations according to EN 12 004 C2 FE-S1. Servoflex-Trio-SuperTec is especially formulated to provide full mortar transfer to avoid air entrapments between mortar and covering without the disadvantage of floating bed mortar billowing through joints. Servoflex-Trio-SuperTec will hold heavy stone without sagging. Servoflex-Trio-SuperTec is especially suitable for large modular ceramic tile installations, porcelain stoneware and natural stone coverings on limited form stable substrates such as heated screed (please follow the respective regulations and data sheets), in situ concrete (at least 3 months old) and similar. By increasing the water content to approx. 1.8 US gal. (7.0 liters) per bag you yield a pourable floating bed mortar allowing an even installation without air pockets. Thus the back buttering-floating technique does not apply here. Servoflex-Trio-SuperTec will hold heavy stone, large tiles without sagging. Heated floors can be operational after three days only * (please follow local and manufacturer specifications).

KIESEL

SERVOFLEX

Vero-Learning-Kiesel-ServoFlex-Thinset

FLEXIBLE FULL TRANSFER THIN-SET & MEDIUM BED MORTAR

Flexible Full Transfer Thin Set and Medium Bed Mortar

– Adjustable mortar consistency
– Rapid hardening development ( can be exposed to final heavy commercial traffic after three days only *)
– Excellent non sag characteristics for large and small format tiles
– No billowing of mortar through joints
– Extended coverage
– For interior and exterior application
– Reliable curing at low temperatures
– Can also be used over heated screed, balconies and patios
– In compliance with EN 12 004 C2 FE-S1
** white version available

Product Description

Flexible, acrylic polymer, cement-based thin set and medium bed mortar with polymer additive for application layers of up to 25/32″ (20 mm) for interior and exterior installations according to EN 12 004 C2 FE-S1. Servoflex-Trio-SuperTec is especially formulated to provide full mortar transfer to avoid air entrapments between mortar and covering without the disadvantage of floating bed mortar billowing through joints. Servoflex-Trio-SuperTec will hold heavy stone without sagging. Servoflex-Trio-SuperTec is especially suitable for large modular ceramic tile installations, porcelain stoneware and natural stone coverings on limited form stable substrates such as heated screed (please follow the respective regulations and data sheets), in situ concrete (at least 3 months old) and similar. By increasing the water content to approx. 1.8 US gal. (7.0 liters) per bag you yield a pourable floating bed mortar allowing an even installation without air pockets. Thus the back buttering-floating technique does not apply here. Servoflex-Trio-SuperTec will hold heavy stone, large tiles without sagging. Heated floors can be operational after three days only * (please follow local and manufacturer specifications).

DATA SHEET
PERFORMANCE
SAFETY SHEET